Highway Driveway Brightness Aluminum Plate Solar Powered Road Studs
Reflective / Cats Eyes Road Markings
This solar aluminum road stud is designed for highway,crossing /
lane divider roadside with single lens or double lens cover 2 LEDs
for each lens for driver warning signal to make more safer in
traffic control systems.
Solar Road Stud / Solar Road Marker is a protruding sign. It's
self-luminous, energy supply by solar panel and durable Ni-mh
battery. Generally used for paving road ,used at night or in the
rain and fog weather, and sketched the outline of the road, to
improve road safety. Weight capacity at least 30 tons,consistant
working time at least 15 days after one time fully charged, with 3
years quality guarrantee and optional color for option.
|Reflective Road Studs|
|Solar panel||2V/100MA Monocrystalline Silicone|
|1.2V/600mAh Ni-MH Battery|
|LED Quantity||4 Pieces|
|LED Frequency||Flash for 90 times per minute or as customed|
|LED Color||Red / Yellow / White / Blue / Green|
|Working Temperature||-20℃ to +80℃|
|Lighting Time||120h after full charged|
|Turn on light intensity||400-500 Lux|
|Protect Level||IP68 can work under water|
|Weight Resistance in Static||>20 Tons|
|Luminous Intensity||12000 mcd -20000mcd|
3. Construction Site.
1 Light control design,can work automatically according to the
2 Rainproof , it can work normally in the rainy day.
1. Aluminum outer casting with anodized coating.
The anodized coating of outer casing protect it from being oxidized
and it look smooth and nice.
2. Reflector embeded from the inner side.
The reflector embeded from the inner side,which is lower than the
surrounding aluminum and not easily be damaged,reflective sheet
inside coated with layer of film avoid eroding reflectors.The
lifespan of reflectors is extend effectively.
3. High quality adhesive
We filled up the solar road stud with AB epoxy glue,it is solid
inside,it had high performance on waterproof,it can get protect
lever IP68 and can anti 30 tons pressure,it is widely used in the
4. Super bright led
The led is very bright,it is visible from 1000 meters and the
lifespan is as long as 100000 hours,it won't get fade and die out
5.Reduce the impact.
The aluminum frame with smooth edges is sand-blasted,the solar road
stud is no harm for the tires,and could extend the wheels life
1.Installation Location:Road Edge
2.Material and tool to prepare
Screw,steel brushes,Scrapers,Chalk,Tape Measure,Plastic
Bucket,Stick Broom,Reflective Clothes,Road Cone,Drill,Hammer
a.First use a ruler to determine the installation location,to
ensure that the location of the vertical are in a straight line,the
installation distance according to the design requirments,the
installation ground need to be flat,dry,clean,seamless.
b.Dig the hole
Put the solar road studs in the installation position and set the
Move the solar road studs and dig the hole with drill for the
screw,knock the screw the hole with hammer.Put the solar road studs
on the screw and fit the nuts for the screws.
C.Put the cement.
Put some cement on the nuts to fix the screws.
Reflective Road Studs Details Pictures: